Creality
Ender 3
Ziro
Optional
PLA
You will need to print the following:
1 x Base
2 x Sides
2 x Base posts
3 x Feet
1 x Headphone post/ mount
1 x Cable hook
Hardware required:
19 M3x10mm screws.
Print settings for the different components.
Base: 40% infill. 0.3 Layer height
Sides: 50% infill. 0.3 Layer height
Base posts: 100% infill. 0.24 Layer height
Feet: 40% infill. 0.24 Layer height
Headphone post/ mount: 50% infill. 0.3 Layer height
Cable hook: 100% infill. 0.3 Layer height
Recommend printing the sides with a brim of 10 - 15 lines to prevent warping.
No review found yet